Skip to content. Skip to navigation
You are here: Home » Forum » Support » Silverstone v1.2 will be used for 2010A7
Document Actions

Silverstone v1.2 will be used for 2010A7

Up to Support

Silverstone v1.2 will be used for 2010A7

Posted by David Hostetler (Admin) at February 20. 2010

Please note that we'll be using a specific version of the Silverstone track.  It's a 'custom' v1.2 of the F1 1988 track by carerra4.  It's just the v1.1 that's included in the 88 trackpack, but  with a fix to the maps file so that the textures work under all DX settings.

http://gridmotorsports.com/files/rfactor/tracks/silverstone88_carrera4_v12.7z

We are *NOT* using the standalone 88 Silverstone listed on RFC, which is v1.0, and we're not using the v1.1 that's included in the F1 1988 track pack.  Both are busted in different ways with either DX 7 or 8.

NOTE: the v1.2 that we packaged is multiplayer-compatible with the v1.1 from the track pack.  So if you haven't had any problems loading the track, then you should be fine and don't need to switch to the v1.2 package.  This new version is only for people that were experiencing crashes when using their normal graphics settings.  However, if you don't use this package, and you encounter incompatibility messages when attempting to join the server, please first switch to v1.2 and try it before sounding the alarm.

 

[updated: 20100228, version bumped to 1.2 because even v1.1 didn't have all necessary texture fixes]

Re: Silverstone v1.1 will be used for 2010A7

Posted by Zack Litchfield at February 23. 2010

My Silverstone keeps crashing out and I'm totally lost as to why. The error it gives me is something about RMBLE is incorrect.

The error says: Error loading texture RMBLE for material RMBLE. Global texture RMBLE is incorrect.

Re: Silverstone v1.1 will be used for 2010A7

Posted by AJ Weber (Admin) at February 23. 2010

Did you use the one Hoss posted, 1.1?

If so, maybe DX7 is still not right, but we know the problem and have a fix, and it does not require everyone update to a fixed track.  All you need is a MAS file from me to replace the one you have.

But before we do all that, try another DX level and see if A) it works and B) is it fast enough for you.  Silverstone is pretty spartan, so DX8 may be quick enough for you anyway.

Re: Silverstone v1.1 will be used for 2010A7

Posted by David Hostetler (Admin) at February 23. 2010

Zack please be sure that you're using the correct version (specifically -- the one linked above).  And for good measure, prior to extracting it just delete any other version you have.  And note that the two different flavors of silverstone (standalone vs. the 1988 pack one) install into two different directories in Gamedata\Locations.

I verified that the 1.0 version doesn't work in DX7 and that the v1.1 DOES.

Re: Silverstone v1.1 will be used for 2010A7

Posted by Zack Litchfield at February 23. 2010
This has happened to me previously so I dl the link above. I'll try deleting the entire folder for that and reinstall again. This happened on both DX7 an DX8. It's obviously local to my system so I'm sure I screwed up the files at somepoint. Can this silverstone be installed without the rest of the 88 track pack as I may just delete the entire thing and just drop in silverstone.
Powered by Ploneboard